AQUAMAT-FLEX (A & B) GRAY 33KG

AQUAMAT-FLEX, flexible, spreadable two-component waterproofing mortar in gray shade from Isomat.

It consists of a cement-based mortar (component A) and a resinous emulsion (component B).

After its solidification, it forms a membrane without joints and joints, which offers the following advantages:

• Ability to bridge cracks.
• Full waterproofing even in positive hydrostatic pressure up to 5 atm according to EN 12390-8. It can also receive negative pressures.
• Protection of concrete from carbonation.
• Water vapor permeability.
• Can be applied to drinking water tanks, as well as to surfaces in contact with food, according to the requirements of W-347.
• Resistance to aging.
• Adhesion to wet surfaces without prior priming.
• Easy and economical application.

Inside the container are:

• 25kg bag:  (component A) cement-based mortar
• 8kg can:  (component B) resinous emulsion
• Color:  Grey

It is classified as a concrete surface protection product according to the EN 1504-2 standard. Certificate number: 2032-CPR-10.11.

• It is used for waterproofing surfaces made of concrete, plaster, brick, cement block, mosaic, etc., which present or are about to present capillary cracks.
• It is ideal for waterproofing roofs, balconies and wet areas (bathrooms, kitchens, etc.) that are to be covered with tiles.
• It is also used for waterproofing inverted roofs, underground tanks, planters, etc.
• It can also be applied to waterproof basements,  internally or externally, against moisture or water under pressure.