Skip to main content

Filling and Thermal Insulation of the floor

Advantages of floor fillings with Τherbobeto®

  • Very light weight
  • Stunning endurance
  • Thermobeto® adds thermal insulation to the filling of your home.
  • Very good transpiration (bioclimatic material)
  • Does not crack
  • Suitable for all the types of final surface (tiles, wood, marble, etc.)
  • Excellent, smooth final surface.

Floor fillings Andreoy group

  1. Trust Andreoy Insulation SA as well as thousands of others. It applies:
  • Quality Control System ISO 9001: 2015 & Environmental Management System ISO 14001: 2015
  • Occupational Health and Safety Management System ISO 45001:2018
  1. All the construction crews of Andreoy Insulation SA consist of:
  • Civil Engineers
  • Certified technicians on Insulations / Insulators by ESYD in accordance with the International Standard ISO / IEC 170244
  • Specialized and certified technicians according to DIN CERTCO

 Andreoy insulations guarantee

Ask our offer and prices for floor fillings with Τherbobeto®

Contact us. We give solutions on fillings for floor. Simply!

  1. Fill the contact form
  2. Call us at the following telephone numbers: 210 62 55 780, 22 210 79 950
  3. Come to our technical departments in Athens and Chalkida
  4. Visit our Facebook and Twitter pages and send a message

Andreou Insulation SA is available in Athens and Attica, Chalkida, Evia, Thiva and Central Greece.

 

Technical description of floor fillings with Τherbobeto®

Floor fillings

Existing Substrate

All the surfaces must be free of materials from previous constructions crews such as bricks, plasters, cables, rubbish etc. Our constructions crews carry out the final surface cleaning for the application of Terbobeto®. After the cleaning, is used the laser to obtain its final level to be laid (altitudes).

Primer adhesion 

Spraying all of the surface with a primer to ensure optimal adhesion of the Thermobeto® with the existing concrete slab.

Floor flling

The application of the Τherbobeto® heat-proof fiber reinforced lightweight concrete is performed by our specialized crews and with the use of a special press. After the coagulation of Terbobeto®, follow the scratching to its surface to be within the allowed tolerances and to be smooth and clean for the application of the final surface. Scratching of the surface is done after one to three days, depending on the weather conditions.

Floor hardening

Application of special hardeners and reinforcing adhesion to apply the final surface above the floor filling.

Perimetric joint of expansion 

Perimetrically, in all masonry, a thermojoint foam is placed at a height higher than the final level of the substrate to form expansion joints with the masonry.

The tiles should be placed without cutting the thermojoint foam. After the installation, the foam is cut, sealed with a suitable material and the skirting board is placed without any contact with the floor tile.

According to national specifications, additional expansion joints may need to be based on mand surface geometry filled with Terbobeto®

 

Final surface

After seven days, you can proceed with the application of the final surface (tiles, marbles, laminate, etc.)

The final substrates provided by national specifications (eg tiles) should be properly studied and applied with expansion joints during installation.