AQUAMAT-FLEX (A+B) Gray 18kg flexible, cement-based waterproofing slurry

AQUAMAT-FLEX is a two-component, flexible waterproofing slurry consisting of a cementbased powder mortar (component A) and a resin emulsion (component B).

After hardening, it forms a seamless, jointless membrane with the following advantages:

• Crack-bridging ability.
• Total waterproofing against positive hydrostatic pressure up to 5 atm according to EN 12390-8. It can also withstand negative pressure.
• Protection of concrete from carbonation.
• Vapor permeability.
• Suitability for potable water tanks, as well as food contact surfaces, according to W-347.
• Resistance to aging.
• Bonding to wet surfaces without priming.
• Simple and low cost application. 

The container contains:

• Bag 14kg: (component A) cement-based cement
• Can 4kg: (component B) resin emulsion

Grey colour

It is classified as a concrete surface protection product according to the EN 1504-2 standard. Certificate number: 2032-CPR-10.11.

• It is used for waterproofing surfaces made of concrete, plaster, brick, cement block, mosaic, etc., which present or are about to present capillary cracks.
• It is ideal for waterproofing roofs, balconies and wet areas (bathrooms, kitchens, etc.) that are to be covered with tiles.
• It is also used for waterproofing inverted roofs, underground tanks, planters, etc.
• It can also be applied to waterproof basements,  internally or externally, against moisture or water under pressure.