Neodur Varnish (A) 3.6kg & (B) 1.4kg Polyurethane varnish

 2-component polyurethane varnish.

Corrosion-resistant & water-resistant, in several solvents, dilute acids & alkali and salt solutions. Provides long lasting weather resistance, does not turn yellow, is not affected by ultraviolet radiation & has high mechanical strength. Suitable for cement, stones, painting metal surfaces in urban, industrial & marine environments, such as: Railings, Metal Doors & Columns, Pipes, Metal Pylons, Silos, Metal Roofs, Boats.

It can be applied in two layers, as a protective varnish after epoxy paint, in swimming pools providing resistance and protection from sunlight, extending the time of occurrence of the chalk effect.

Specifications

• Consumption: 125gr / m² on properly prepared surfaces
• Application temperature: 12-35 ° C
• Density Ingredient: A: 0.98-1.02kg / L, Ingredient B: 1.01kg / L
• Shine (gloss 60o) 90
• Mixing ratio 3.6A: 1.4B
• Full polymerization time 7 days at 25 ° C
• WTO (Category ADA) Special 2-component coatings (WTO 2010 limit: 500 g / lt).
• Ready-to-use product content: <498 g / lt

Properties / Benefits

• Protects against water absorption
• Strengthens the mechanical strengths of pressurized concrete.
• Contains UV filters that provide long-lasting resistance to sunlight.
• It does not turn yellow
• It does not lose its shine even after many years.
• It is resistant to marine environment
• It exhibits chemical resistance to dilute acids and alkalis
• It has high mechanical strength.
• It has good adhesion even in polyester or galvanized steel.