All products
Spray HI-HEAT Red C.L. 400ml

Spray HI-HEAT Red C.L. 400ml For high temperatures red

81.10371
MPN: 7770353
Price €7.90
AVAILABLE

The high temperature colors of Cosmos Lac are the only ones that, due to the special silicone base, offer real resistance to temperatures up to 700 degrees Celsius.

They paint and economically renew surfaces such as stoves, burners, exhausts and generally all iron surfaces that develop high temperatures.

  • Code: 353
  • Color: Red
  • Package: Spray 400ml

CHARACTERISTICS

  • High temperature color (up to 700°C) Red
  • Excellent grip
  • High resistance to oxidizing agents
  • High coverage
  • Touch drying time (1 coat, Temperature 20°C, Humidity <65%): 20-30 minutes
  • Full drying (1 layer, Temperature 20°C, Humidity <65%) : 3 hours
  • Repaint: 3 hours
  • 400 ml

APPLICATION
Ideal for exhausts, boilers, chimneys, wood stoves, furnaces, and any iron surface exposed to high temperatures.

INSTRUCTIONS:

  • Shake the container for at least 3 minutes after you hear the ball.
  • Before first use, spray into the air for 3-4 seconds, with the black valve, to remove any concentrated paint from the inner tube.
  • Test the spray first on a test surface.
  • If you press the nozzle while holding your hand steady, there is a chance that the paint will run and create "tears". We recommend that you apply a second coat, with an interval of 10 minutes.
  • For best results paint at temperatures between 10-25°C and when humidity is below 65%. After use, turn the container upside down and spray for 3 seconds.
  • Store 5-35°C.

TIPS:

  1. Make sure the surface is clean, smooth and dry
  2. Always use personal protective equipment gloves/mask
  3. Always paint in a well-ventilated outdoor area
  4. Always spray with the can in a vertical position, otherwise it may spray unevenly
  5. Spray from a distance of 25-30cm
  6. Spray first vertically and then horizontally
  7. Spray in several thin layers to avoid over application. Before each coating, shake the spray well
  8. After use, clean the spray valve (turn the aerosol upside down and press the nozzle for about 5 seconds). Use nitrous solvent to clean tools
  9. After the first coat of paint gradually heat the surface at 250°C for 45 minutes to achieve hardening of the paint. Fumes may be produced during the curing of the paint

ATTENTION: This paint is NOT suitable for surfaces that will come into direct contact with flame

Related products