Spray N350 Hi heat alumin 400ml

Spray for resistance to high temperatures 700°C Gray 350 400ml

Paint made of special resins and dyes of high resistance to high temperatures. Used on surfaces that develop temperatures up to 700°C, but not on surfaces that come in direct contact with flame.

It is ideal for car exhausts - motorcycles, stoves, grills, fireplace decorations, radiators, etc.

• Code: 350
• Color: Silver
• Packaging: Spray 400ml

FEATURES:

• High temperature paint (with resistance up to 700°C)
• Excellent adhesion
• High resistance to oxidizing agents
• High coverage capacity
• Drying time (1 coat, Temperature 20°C, Humidity <65%): 20-30 minutes
• Complete drying (1 coat, Temperature 20°C, Humidity <65%): 3 hours
• Repaint: 3 hours
• 400ml
• APPLICATION:

Ideal to paint and renew surfaces such as stoves, burners, exhausts and generally all iron surfaces that reach high temperatures.

INSTRUCTIONS:

• Shake the container at least 3 minutes after you hear the mixing ball.
• Before the first use spray it in the air for 3-4 seconds to remove any condensed color.
• After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one.
• Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying.
• Storage 05-35°C.

TIPS:

1. Ensure the surface is clean, dry and free of grease
2. Wear protective gloves, protective clothing, eye/face protection
3. Always paint in an open space in the open air
4. Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
5. Spray surface from a distance of 25-30cm
6. After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds). Use nitro solvent to clean tools
7. Paint first vertically and then horizontally
8. After the first coat of paint, gradually heat the surface to 250°C for 45 minutes to achieve a hardening of the paint. Smoke is likely to form when the paint hardens
9. CAUTION: This paint is NOT suitable for surfaces in direct contact with flame