PLANOFINISH PU 2KS Transparent aliphatic two-component polyurethane varnish A 0.72L& B 0.28L

Aliphatic polyurethane varnish, two components with high resistance to solar radiation.  

• It is suitable for indoor and outdoor spaces as well as for permanent immersion in water (swimming pools and hot tubs) providing a glossy look to pressed cement mortars and natural stones.
• Due to its excellent mechanical strength, it significantly improves the surface protection against wear when applied over epoxy paints or floor coverings.
• It has high adhesion even on metal.

• Form: liquid
• Working time: 1 hour > 30°C & 2 hours > 25°C & 2.5 hours > 12°C
• Potability: 24 hours > 25°C & 36 hours > 12°C
• Repainting time: 24 hours for temperature < 23°C & 12 hours for temperature > 30°C
• Abrasion resistance: 42mg Tabertest ASTM D 4060 (CS 10/1000/1000)
• Tensile strength: ≥ 2.4 N/mm²
• Application temperature: from +12°C to +30°C
• 1lt package (A 0.72L & B 0.28L)

PLANOFINISH PU 2KS solvent-based glossy aliphatic polyurethane varnish can be used to protect and highlight surfaces such as:

• cement plaster PLANOCOLOR PREMIUM 2K in outdoor areas and floors with heavy use in houses, hotels, parking areas, outdoor benches and built-in furniture
• cement mortar press PLANOCOLOR PREMIUM SP in swimming pools and areas with increased and permanent humidity
• epoxy self-leveling coatings or floor paints such as the PLANOCOCOAT EPX, PLANOFLOOR EPX or PLANOCOLOR LIQUID GLASS systems in order to increase their surface resistance to mechanical stress
• of Karystos stone, stone plasterer mainly outdoors
• industrial floors made of concrete and hardener such as NOVADUR S in industries, parking lots, gas stations, ramps
• non-absorbent surfaces such as galvanized sheet metal, polyester, etc.