PU VARNISH (A) 3L Cement & floor varnish

High quality and special composition water-soluble varnish 2 components. Based on polyurethane resins. Shows strong adhesion to properly prepared surfaces and develops very good chemical and mechanical strength.
Purpose of Use
Ideal for the protection of the Deco Cire product. It can also be used on wooden surfaces, plaster, exposed concrete and as a protective varnish on properly prepared metal surfaces. It is colorless and does not paint. Available for professional use only.

• This product is component (A) and is necessarily combined with component (B) which you will find here

• Product type: 2-component varnish (A + B)
• Material base: Polyurethane resins
• Use: Indoor & Outdoor
• Application: Mainly for Deco Cire, pressed cement mortars
• Color: Colorless (Not colored)
• Ingredient Ratio: 10% by volume of B component to A component
• Dilution: Diluted with water at a rate of 10% by volume if it is the first coat (as a primer) and at a rate of 5% by volume if it is a final coat.
• Application: With roller or brush
• Drying time: 1 - 1.5 hours, depending on weather conditions
• Repaint time: After 3 hours and not after 72 hours
• Yield: 10-12m² / lt, on non-porous surfaces.

• New technology polyurethane water soluble resins.
• High adhesion.
• High resistance to chemical agents such as household pollutants.
• High mechanical strength.
• High resistance to outdoor weather conditions.
• Long service life.