Neodur Varnish Satine (A+B) 1kg Polyurethane Varnish

Aliphatic polyurethane acrylic varnish, two components, with UV filters, suitable for protection of structural surfaces, such as pressed cement mortar.

• It is used for protection of pressed cement mortar, painting of metal surfaces, cement, stone, polyester, industrial floors, as well as constructions in areas next to the sea.
• It can be applied in two hands, as a protective varnish after the epoxy paint, in swimming pools offering resistance and protection from solar radiation, prolonging the time of appearance of the chalking effect.

See the information sheet here Neodur:

Specifications

• Consumption: 125gr/m² on properly prepared surfaces
• Application temperature: 12-35°C
• Density Component: A: 0.98-1.02kg/L, Component B: 1.01kg/L
• Gloss (gloss 60o) 90
• Mixing ratio 3.6A:1.4B
• Full curing time 7 days at 25°C
• WTO (AiD Category) 2-component special coatings (WTO limit 2010:500
• g/lt). Ready-to-use product content: <498 g/lt  

Features/Benefits

• Protects against water absorption 
• Strengthens the mechanical strength of pressed cement mortar. 
• It contains UV filters that provide long-term resistance to solar radiation.
• It does not turn yellow 
• It does not lose its luster even after many years. 
• Withstands marine environment
• It exhibits chemical resistance to dilute acids and alkalis
• It has high mechanical strength.
• It has very good adhesion even on polyester or galvanized sheet metal.