Skip to main content

MP20 5kg- Building Mortar Resin

81.07029
MPN: 0011856
Price €31.21

Synthetic admixture of mortar emulsion. It improves their workability while increasing their mechanical and chemical strengths. Due to its studied composition, it increases the adhesion, elasticity and waterproofing of both ready-made and traditional mortars. It is useful in any construction, plastering and flooring work as well as in the installation of marble and ceramic tiles.

Emulsion - solution

  • Widely used product.
  • It significantly increases the properties of mortars.
  • Environmentally friendly.
  • It is not toxic.
  • water based, acrylic resin.

it can be used in all traditional and ready-made mortars:

  • Building Mud: Improves adhesion of mortars
  • Plasters: Improves their adhesion, durability and waterproofing. In particular, it is recommended to use it in high-speed plaster SV 1 when applied to difficult surfaces, such as smooth or clear concrete, etc. and replacing part of the water with MP 20.
  • Increases adhesion and moisture resistance of adhesive products. It strengthens the joints in moisture and cold while increasing their mechanical strength. It creates a suitable surface for adhesion to non-absorbent surfaces such as old tiles, marbles, mosaics, etc.
  • Necessary gypsum board primer to be tiled. Prevents shrinkage and fractures when setting cement mortars.
  • Waterproof Mortar: Improves waterproofing and elasticity of the mortar.
  • Spatula Putty: Strengthens and improves durability and adhesion.
  • It can also be used as a primer on concrete, brick or older mortar diluted with water (50 - 100% water) before applying a mortar.
  • The outer northern walls of the house, if primed, are protected from moisture. Special care should be taken to apply the mortar before drying.